TM 9--2350--292--20--2
0602 00--2
AUXILIARY POWER UNIT CRANKCASE OIL FILL LINES REPLACEMENT
CONTINUED
0602 00
Removal--Continued
3. Disconnect hose assembly (8) from fuel injection pump (not shown). Disconnect other end of hose assembly (8)
from oil filler tube assembly (4). Remove and inspect hose assembly (8), replace if damaged or unserviceable.
4. Remove coupler (9) from elbow (10).
5. Remove elbow (10) from oil filler tube assembly (4).
6. Remove two screws (11), two lockwashers (12) and oil filler tube assembly (4). Discard lockwashers.
7. Remove elbow (7) from oil filler tube assembly (4).
8. Remove gasket (13) from oil filler tube assembly (4) or mating surface on APU assembly, whichever is applicable.
Discard gasket.
9. Inspect parts for damage and replace as required.
Cleaning
WARNING
1. Clean gasket mating surfaces on oil filter tube assembly (4) and APU assembly with dry--cleaning solvent.
2. Ensure all gasket material is removed from mounting surfaces.
Figure 334
4
10
13
7
8
12
11
9
20--83/(20--84 blank)
