AUXILIARY POWER UNIT CRANKCASE OIL DRAIN LINES REPAIR

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
907

TM 9--2350--292--20--2 0604 00--1 AUXILIARY POWER UNIT CRANKCASE OIL DRAIN LINES REPAIR 0604 00 THIS WORK PACKAGE COVERS: Removal, Disassembly, Assembly, Installation INITIAL SETUP: Tools and Special Tools General mechanic’s tool kit (item 1, WP 0717 00) Materials/Parts Spring pin (item 158, WP 0718 00) Grooved pin (item 159, WP 0718 00) Lockwashers (2) (item 110, WP 0718 00) Lockwashers (3) (item 132, WP 0718 00) Sealing compound (item16, WP 0716 00) Equipment Conditions APU engine support removed (WP 0591 00) APU crankcase oil drained (WP 0187 00) APU saber gauge removed (WP 0598 00) Personnel Required Two Removal 1. Disconnect hose assembly (1) at pipe elbow (2). Disconnect other end of hose assembly (1) from elbow at oil filler tube assembly (3). 2. Remove pipe elbow (2) from pipe nipple (4). 3. Remove pipe nipple (4) from tube assembly (5). 4. Remove screw (6), lockwasher (7), nut (8) and loop clamp (9) from bracket (10). Discard lockwasher. 5. Remove two screws (11), two lockwashers (12) and bracket (10). Discard lockwashers. 6. Remove tube assembly (5) from elbow (13). Figure 334 1 2 4 5 6 7 8 9 10 11 12 13 3

Privacy Statement
Press Release
Contact