TM 9-2350-238-10
OPERATING CRANE–CONTINUED
LOAD RATING CAPACITIES INSTRUCTION PLATE–CONTINUED
VIEW C
BOOM WINCH OPERATION
1 Start hydraulic system. Refer to page
2-67.
Do not pay out boom winch
wire rope beyond last four
wraps of rope on winch drum.
Shift winch only when winch is
at full stop. Winch internal
gears may be damaged if winch
is shifted while being operated.
NOTE
All controls are spring-loaded to
return to center position. Hold
onto control handle at all times
when operating winch.
2 Pull up on shift control lever and push
shift control lever (1 ) to LO position for
low speed operation of boom winch.
Release lever to lock control into posi-
tion. Always use winch in LO position
when hoisting loads.
2-75
