TM 9-2350-238-10
LAMP REPLACEMENT–CONTINUED
HEADLAMPS–CONTINUED
1
2
3
4
5
Remove four screws (1), four lock-
washers (2), cover (3), and gasket (4)
from headlight assembly (5).
Check for cracked, damaged, or torn
cover (3) and gasket (4). If condition ex-
ists, notify unit maintenance personnel.
Remove reflector (6), then push inward
on lamp (7) and turn counterclockwise to
release lamp (7) from bulb socket (8).
Snap open cover of marker assembly (9).
Insert a screwdriver into center slot of
marker assembly (9), push inward, and
turn counterclockwise to remove from
bulb socket (8).
Apply a light coat of silicone compound
(item 38, appx D) to bulb sockets (8).
STOPLIGHT-TAILLIGHT
1 Loosen six screws (1) and remove door
(2).
2 Check for cracked, damaged, or torn
door (2) and packing (3). If condition ex-
ists, notify unit maintenance personnel.
3 To remove lamps (4), depress and turn
counterclockwise. Apply a light coat of
silicone compound (item 38, appx D) to
socket before installing new lamps (4).
Install new lamps (4) into bulb socket.
Push inward and turn clockwise to
secure.
4 To remove marker assembly (5) insert
screwdriver into center slot, push in-
6 Install new lamp (7) into bulb socket (8)
Push inward on lamp (7) and turn
clockwise to secure. Install reflector (6)
over lamp (7).
7 Snap open cover of new marker
assembly (9). Install new marker
assembly (9) into bulb socket (8). Insert
a screwdriver into center slot, push in-
ward on marker assembly (9), and turn
clockwise to secure.
8 Reinstall gasket (4) and cover (3) with
four Iockwashers (2) and four screws
(1).
ward, and turn counterclockwise. To
remove stop lamp assembly (6), snap
open cover, insert screwdriver into
center slot, push inward, and turn
counterclockwise to secure.
5 Apply a light coat of silicone compound
(item 38, appx D) to socket before in-
stalling new marker assembly (5) or lamp
assembly (6). Open cover of new stop
lamp assembly (6), then install new
marker assembly or new stop lamp
assembly by using a screwdriver to turn
and lock base of assembly into socket to
secure. Snap housing cover of stop lamp
assembly closed.
6 Reinstall door (2) with six screws (1 ).
3-37
