TM 9-2350-238-34-2
2-45. MAINTENANCE OF TURRET TRAVERSE CONTROL DIRECTIONAL LINEAR VALVE
AND SPOOL ASSEMBLY (CONT).
INSPECTION/REPAIR (CONT)
12 If spool is broken, damaged, or missing, repair is by replacement of next higher assembly,
13 If helical spring is broken, damaged, or missing, repair is by replacement of next higher
assembly.
14 If any kit component is damaged, replace entire repair parts kit.
15 Repair is by replacement of authorized parts (TM 9-2350-238-24P-2).
REASSEMBLY
1
2
3
4
5
6
NOTE
Apply engine oil (item 15, appx B)
to all new preformed packings and
spools.
Install new preformed packing (1), new
backup ring (2), new preformed packing
(3), new preformed packing (4), and new
backup ring (5) on assembly plug (6).
Install assembly plug (6) in body (7).
If removed, install new turret traverse
control valve body nameplate (8) and
two new drive screws (9) on body (7).
Install new preformed packing (10), new
seal wiper (11), new wiper ring (12),
spool seal retainer (13), and two new
assembled washer screws (14) in body
(7).
Install new preformed packing (15), new
packing retainer (16), and new pre-
formed packing (17) on port fitting (18).
Install port fitting (18) in body (7).
2-220