MAINTENANCE OF TRAVERSING SYSTEM INSTALLATION

TM-9-2350-238-34-2 Recovery Vehicle Full-Tracked: Light Armored M578 (2350-00-439-6242) Manual
Page Navigation
226

TM 9-2350-238-34-2 2-46. MAINTENANCE OF TRAVERSING SYSTEM INSTALLATION. This task covers: a. R e m o v al b. Inspection/Repair c. Installation INITIAL SETUP Tools and Special Tools General mechanic’s tool kit, automotive (SC 5180-90-CL-N26) Shop equipment, automotive mainte- nance and repair: field maintenance, basic, less power (SC 4910-95-A31) Wrench set, socket, 3/4-in. square drive Wrench, torque, 0-600 ft-lb Shop equipment, automotive maintenance and repair: supplemental no. 1, less power (SC 4910-95-A62) Hoist, chain, 6000 lb (2724 kg) Sling (RE1-91-16018) Materials/Parts Lockwasher (MS35333-40) Lockwasher (3) (MS35338-51) Lockwire (QQW461) Self-locking nut (NAS101N17) Personnel Required 2 References TM 9-2350-238-20-2 TM 9-2350-238-24P-2 Equipment Conditions Forward left-hand nonskid metallic tread removed (TM 9-2350-238-20-2) Rear left-hand nonskid nonmetallic tread removed (TM 9-2350-238-20-2) Equipment stowage accessories box removed (TM 9-2350-238-20-2) Oil drained from cab traversing unit (TM 9- 2350-238-20-2) General Safety Instructions Use hoist of 2000 lb (908 kg) minimum lifting capacity to pre- vent injury to personnel and damage to equipment. REMOVAL 1 Remove hexagon capscrew (1), lock- washer (2), loop clamp (3), and oil drain metal tube assembly (4). Remove straight tube adapter (5) from oil drain metal tube assembly (4). 1 2-222 Change 1

Privacy Statement
Press Release
Contact