TM 9-2350-238 -34-2
2-20. MAINTENANCE OF WINCH LEVEL WIND AND CONNECTING LINK SLIDE
(CONT).
DISASSEMBLY (CONT)
3 Using hammer and punch, remove two
spring pins (6), two slide bar headless
straight pins (7), four thrust washer bear-
ings (8), and two manual control clevis
handles (9) from level wind housing (10).
4 Using hammer and punch, remove spring
pin (11), slide bar headless straight pin
(12), two hrust washer bearings (13),
and clevis rotating eye bracket (14) from
each of two rod end clevises (15).
5 Using hammer and punch, remove spring
pin (16), slide bar headless straight pin
(17), two thrust washer bearings (18),
and rod end clevis (15) from each of two
manual control clevis handles (9).
2-22