TM 9-2350-256-20CHAPTER 9: MAINTENANCE OF HULL- AND CAB-RELATED COMPONENTS9-75 REPLACE/REPAIR STEERING CONTROL HOUSING ASSEMBLYTHIS TASK COVERSa. Removalb. DisassemblyINITIAL SET-UPTools;:•Tool kit, general mechanic’s (Appendix C, item 53)• Puller kit, mechanical (Appendix C, item 14)c. AssemblyParts:Bearings (2) (Appendix G, item 3)Reference:Deletedd. Installationa. REMOVALRemove steering control housing assembly (see paragraph 9-72).b. DISASSEMBLY1Remove two lubrication fittings (1 and 2) fromhousing (3).NOTEBearing (4 and 5) are mounted in housing(3) with a light press fit.2Drive bearing (4 and 5) out of housing (3).3Pull and remove two pins (6 and 7) from housing(3).c. ASSEMBLY1Install two pins (16) and 7) in housing (3).2 Install two new bearings (4 and 5) in housing (3)3Install two lubrication fittings (1 and 2) to housing(3).4Lubricate steering control housing assembly (seeAppendix J).d. INSTALLATIONInstall steering control housing assembly (see paragraph 9-72).9-158 (9-158.1 blank)Change 1
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
