SECTION I: MAIN WINCH ASSEMBLY
TM 9-2350-256-20
11-5 REPLACE MAIN WINCH CABLE
THIS TASK COVERS
a. Removal
b. Installation
INITIAL SET-UP
Tools:
Material/Parts:
Equipment Conditions:
Tool kit, general mechanic's
Grease, GAA (Appendix D,
Cable paid out (refer to TM
(Appendix C, item 53)
item 13)
9-2350-256-10)
Lockwashers (16) (Appendix
G, item 144)
a. REMOVAL
1
Remove two guides (1) by removing four screws
(2) and four lockwashers (3) from each.
2
Remove two retainers (4) by removing four screws
(5) and four lockwashers (6) from each. Remove
two halfbushings (7).
3
Remove two vertical rollers (8), and separate guide
assemblies (9) by removing two screws (10) and
two bearing washers (11).
WARNING
Gloves should be worn when working
with cable to prevent cuts and abrasions.
4
Run cable slowly out and guide cable off drum
(12).
11-7
