CHAPTER 11: MAINTENANCE OF MAIN WINCH, HOIST
TM 9-2350-256-20
WINCH, AND RELATED COMPONENTS
11-8 REPLACE HOIST WINCH MANUAL CONTROL AND LINKAGE-Continued
3
Unscrew and remove control knob (8) from control
lever (5).
4
Remove control rod (1) from control lever (5) by
removing two cotter pins (9) and straight pin (10).
5
Remove two end bearings (11) and two jamnuts
(12) from control rod (1).
b. INSTALLATION
1
Install two jamnuts (12) and two rod end bearings
(11) on control rod (1).
2
Install control rod (1) on control lever (5) with
straight pin (10) and two new cotter pins (9).
3
Install control knob (8) on control lever (5).
4
Install control lever (5) with screw (6) and new self-
locking nut (7).
5
Connect control rod (1) to hoist winch (2) with
straight pin (4) and two new cotter pins (3).
NOTE
Follow-on maintenance: Install stowage basket forward intermediate left floor plate (see paragraph 9-21)
11-12