TM 9-2350-256-20
CHAPTER 3: MAINTENANCE OF ENGINE
3-3
REPAIR ENGINE MOUNTING BRACKET
THIS TASK COVERS
a. Removal
b. Disassembly
c. Assembly
INITIAL SET-UP
Tools:
Personnel Required:
Tool kit, general mechanic’s (Appendix C,
Two
item 53)
d. Installation
Multiplier, torque (Appendix C, item 27)
Socket set (Appendix C, item 48)
Wrench, torque (Appendix C, item 63)
Equipment Condition:
Power-plant removed (see paragraph 3-1)
Parts:
Nuts, self-locking (4) (Appendix G, item 174)
Nuts, self-locking (8) (Appendix G, item 175)
a. REMOVAL
1
Remove engine mount assembly (1) from engine
(2) by removing six self-locking nuts (3), six flat
washers (4), and six screws (5).
2
Remove saddle assembly (6) from engine mount (7)
by removing two screws (8) and two self-locking
nuts (9).
b. DISASSEMBLY
1
Remove four self-locking nuts (10), four screws
(11), and four mounts (12).
2
Remove two shims (13) and two spacers (14) from
saddle (15).
3-16
