REMOVAL - TM-9-2350-256-20

REPLACE ENGINE OIL FILTER SERVICING INSTRUCTION PLATE

TM-9-2350-256-20 Carrier Cargo Tracked 6-Ton M548A1 (2350-01-096-9356) M548A3 2350-01-369-6081 Manual
Page Navigation
451

TM 9-2350-256-20 a. REMOVAL 1 Remove oil vent screw (1), flat washer (2), and packing (3). NOTE Do not loosen oil drain valve adapter (4). 2 Loosen oil drain valve plug (5) by turning 6 complete revolutions. 3 Remove main fuel hose (6) from clamp (7). 4 Remove 10 self-locking nuts (8), 10 flat washers (9), and clamp (7). 5 Install two jackscrews (10) in oil filter cover (11). 6 Remove oil filter cover (11) using two jackscrews (10) for support. 7 Remove gasket (12). 8 Remove oil drain valve (13), oil drain valve plug (5), or preformed packing (14) if necessary. 9 Remove and discard two oil filter elements (15). 10 Remove two retaining rings (16), two packings (17), and two filter bodies (18). 11 Remove two washers (19), two springs (20), and two oil filter supports (21). 3-21

Privacy Statement
Press Release
Contact