TM 9-2350-256-20
CHAPTER 3: MAINTENANCE OF ENGINE
3-7
REPLACE OIL LEVEL INDICATOR AND RELATED PARTS-Continued
b. INSTALLATION
1 Install oil level indicator tube (13) with three new
self-locking nuts (14) and new gasket (15).
3 Install ID plate (10) with two new drivescrews (11)
and two flat washers (12) to oil level indicator tube
cap assembly (2).
3 Install new gasket (8) with two new preformed
packings (9) onto oil level indicator tube cap
assembly (2).
4 Install oil level indicator tube cap assembly (2) on
right front upper cover (3) with two screws (6) and
two new lockwashers (7).
5 Install right front upper cover (3) and strap (4) with
12 screws (5).
6 Install oil level gage rod (1).
7 Replace engine oil (refer to TM 9-2350-256-10).
3-8
REPLACE OIL FILLER TUBE AND RELATED PARTS
THIS TASK COVERS
a. Removal
b. Installation
INITIAL SET-UP
Tools:
Parts-Continued:
Tool kit, general mechanic’s (Appendix C, item 53)
Packings (3) (Appendix G, item 179)
Parts:
Drivescrews (2) (Appendix G, item 15)
Gasket (Appendix G, item 26)
Lockwashers (2) (Appendix G, item 100)
Nuts, self-locking (2) (Appendix G, item 167)
Nuts, self-locking (2) (Appendix G, item 177)
Reference:
TM 9-2350-256-10
Equipment Conditions:
Powerplant removed (see paragraph 3-1)
Engine oil drained
3-24
Change 1
