SECTION V: VEHICLE WIRING
TM 9-2350-256-20
a. REMOVAL
1
Remove eight clamps (11) by removing screw (12) and lockwasher (13) from each.
2
Disconnect connector (1) from voltage regulator (14).
3
Disconnect connector (2) from master relay (15).
4
Disconnect two leads (3 and 4) from slave
receptacle (16) by removing screw (17) and
lockwasher (18).
5 Disconnect connector (5) from engine disconnect
(19).
6 Disconnect three connectors (6, 7, and 8) from
bulkhead to main engine bracket and rear fuel
tank transmitter wiring harness (20).
6-87
