TM 9--2350--292--20--1
0226 00--4
ACCELERATOR CONTROLS AND LINKAGE REPAIR -- CONTINUED
0226 00
Removal--Continued
21. Remove rod end (54) and nut (55) from rod assembly (32).
22. Remove screw (56), lockwasher (57) and rod assembly (32) from clevis (58). Discard lockwashers.
23. Pry boot (59) away from bulkhead, remove rod assembly (32) from bulkhead.
24. Remove clamp (60) securing boot (59) to bushing (61) on rod assembly (32).
25. Remove boot (59) from rod assembly (32).
26. Remove rod end (62), nut (63) and bushing (61) from rod (64).
27. Remove six screws (65) and six rollers (66).
28. Remove screw (67), lockwasher (68) and rod assembly (69) from clevis (70). Discard lockwasher.
29. Remove clevis (58) and nut (71) from rod assembly (69).
30. Remove rod end (72) and nut (73) from rod (74).
Figure 35
67
68
72
73
70
65
66
69
65
66
74
71
58
57
56
32
54
55
64
59
61
60
63
62
