TM 9--2350--292--20--1
0226 00--8
ACCELERATOR CONTROLS AND LINKAGE REPAIR -- CONTINUED
0226 00
Removal--Continued
57. Remove clevis (128), rod end (129) and two nuts (130) from rod (131).
58. Remove screw (132) and nut (133) from pedal assembly (123).
Figure 34
123
133
132
128
131
130
129
130
Disassembly
1. Remove two preformed packings (134) and two roller bearings (135) from pedal assembly (123). Discard pre-
formed packings.
2. Remove two preformed packings (136) and sleeve bearing (137) from bell crank (7). Discard preformed pack-
ings.
3. Inspect parts for damage and replace as required.
Figure 34
7
134
135
123
135
134
136
136
137