TM 9--2350--292--20--1
0226 00--5
ACCELERATOR CONTROLS AND LINKAGE REPAIR -- CONTINUED
0226 00
Removal--Continued
NOTE
To remove brackets, steering, shifting and brake linkage
rollers must be removed.
31. Remove six nuts (75), six lockwashers (76), six flat washers (77) and three brackets (78) from six studs (79). Dis-
card lockwashers.
32. Push throttle control assembly handle (80) in.
33. Remove two nuts (81) from end of throttle control assembly (80).
34. Loosen nut (82) from throttle control assembly (80).
35. Remove screw (83), lockwasher (84) and clamp (85) attaching throttle control assembly (80) to hull. Discard lock-
washer.
36. Loosen two nuts (86) attaching throttle control assembly (80) to hull bracket (87).
37. Remove throttle control assembly (80).
Figure 34
80
82
83
84
85
86
87
81
75
76
77
78
79
