TM 9--2350--292--20--1
0230 00--3
HYDRAULIC OIL COOLER AND RELATED PARTS REPAIR -- CONTINUED
0230 00
Removal--Continued
7. Disconnect two hydraulic lines (4) at tees (16).
8. Remove nut (17), lockwasher (18), screw (19), flat washer (20), two clamps (21) and spacer (22) securing two
hydraulic lines (4). Discard lockwasher.
9. Cut four electrical tiedown straps (23) and remove two hydraulic lines (4) and two hose sleeves (24). Discard
electrical tiedown straps.
10. Remove two screws (25), two lockwashers (26) and bracket (27). Discard lockwashers.
NOTE
Left heat shield is secured with one screw and one lock-
washer.
11. Remove two screws (28), two lockwashers (29) and right heat shield (30). Discard lockwashers.
12. Disconnect two hydraulic lines (31) at tees (16).
13. Remove two quick--disconnect couplings (32) from tees (16).
14. Remove two quick--disconnect couplings (33) from two hydraulic lines (34).
15. Disconnect two hydraulic lines (34) from bulkhead adapters (35).
16. Cut electrical tiedown straps (36) as required and remove two hydraulic lines (34). Discard electrical tiedown
straps.
Figure 38
4
4
16
17
18
19
20
21
16
21
22
23
24
23
25
26
27
32
33
34
31
32
33
34
35
36
35
23
24
23
28
29
30
31
