TM 9--2350--292--20--1
0230 00--4
HYDRAULIC OIL COOLER AND RELATED PARTS REPAIR -- CONTINUED
0230 00
Disassembly
1. Remove 13 screws (37), 13 lockwashers (38), 13 flat washers (39) and hood (40). Discard lockwashers.
2. Remove two screws (41), two lockwashers (42) and rotary solenoid (43) and mount (44). Discard lockwashers.
3. Remove two nuts (45), two lockwashers (46) and rotary solenoid (43) from mount (44). Discard lockwashers.
4. Loosen two screws (47) securing two clamps (48).
5. Remove hydraulic cooler door (49) and two clamps (48) from rod mount (50).
6. Remove two screws (51), two lockwashers (52), two flat washers (53), rod mount (50) and mounting block (54)
from shroud base (55). Discard lockwashers.
7. Remove five screws (56), five lockwashers (57) and cooler support (58) from shroud base (55). Discard lock-
washers.
8. Inspect parts for damage and replace as required.
Figure 38
37
37
37
38
38
38
39
39
39
40
41
42
43
44
45
46
47
47
48
48
49
50
51
52
53
54
55
56
57
58
