TM 9--2350--292--20--10230 00--5HYDRAULIC OIL COOLER AND RELATED PARTS REPAIR -- CONTINUED0230 00Assembly1. Install cooler support (58) onto shroud base (55) with five new lockwashers (57) and five screws (56).2. Install mounting block (54) and rod mount (50) onto shroud base (55) with two flat washers (53), two new lock-washers (52) and two screws (51).3. Position hydraulic cooler door (49) and two clamps (48) into rod mount (50).4. Apply sealant to two screws (47).5. Secure hydraulic cooler door (49) in rod mount (50) with two clamps (48) and two screws (47).6. Install rotary solenoid (43) on solenoid mount (44) with two new lockwashers (46) and two nuts (45).7. Install rotary solenoid (43) and solenoid mount (44) on shroud base (55) with two new lockwashers (42) and twoscrews (41).8. Install hood (40) with 13 flat washers (39), 13 new lockwashers (38) and 13 screws (37).Figure 38373737383838393939404142434445464747484849505152535455565758
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
