TM 9--2350--292--20--1
APU VOLTAGE REGULATOR, MAIN ENGINE VOLTAGE REGULATOR, LEAD
ASSEMBLY 3W193 AND RELATED COMPONENTS REPLACEMENT --
CONTINUED
0239 00
Installation--Continued
6. Install cover (4) on two angle brackets (24) with four screws (22) and four new lockwashers (23).
7. Connect wiring harness 3W180 connector P1 (21) to main engine voltage regulator (20).
8. Connect lead assembly 3W193 (18) and wiring harness 3W180 wire GND (19) to main engine voltage regulator
(20) with screw (15), new lockwasher (16) and flat washer (17).
9. Connect wiring harness 3W702 connector P2 (14) to APU voltage regulator (12).
10. Connect wiring harness 3W710 connector P1 (13) to APU voltage regulator (12).
11. Connect wiring harness 3W710 wire GND (11) to APU voltage regulator (12) with new
assembled--washer screw (10).
12. Install relay (6) on cover (4) with two screws (7), two new lockwashers (8) and two nuts (9).
13. Connect wiring harness 3W180 connector P3 (5) to relay (6).
14. Install cover (3) on cover (4) with three screws (1) and three flat washers (2).
Figure 45
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
18
19
20
22
23
24
24
21
17
NOTE
FOLLOW--ON MAINTENANCE:
Connect battery power (WP 0256 00)
END OF TASK
0239 00--5/6 blank