TM 9--2350--292--20--1
0095 00--1
MAIN WINCH LEVEL WINDER FAILS TO OPERATE.
0095 00
THIS WORK PACKAGE COVERS:
Main Winch Level Winder Fails To Operate.
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
0--5000 psi dial pressure gauge (3) (item 83, WP
0717 00)*
1/4--inch tee (3) (item 71, WP 0716 00)*
Winch ground hop kit (item 26, WP 0716 00)
Safety goggles (item 93, WP 0716 00)
Equipment Conditions
Vehicle MASTER switch OFF (TM 9--2350--292--10)
Vehicle nose piece removed (WP 0497 00)
Personnel Required
Two
* Not required if vehicle is equipped with Enhanced
Diagnostics System
Is quick--disconnect connected properly?
Inspect the level winder control valve return line
quick--disconnect for proper connection.
no
yes
no
yes
A
B
CONTINUED ON NEXT PAGE
Inspect diamond screw drive chain for damage
(links broken or sprocket missing teeth).
Is chain and sprocket free of damage?
Properly connect quick--disconnect.
Verify fault is corrected.
Notify Direct Support Maintenance.
no
yes
C
Inspect the shoulder bolt that connects the level
winder control valve cam to the diamond screw
follower bracket.
Is bolt present and free of damage?
Go to Step K.
WARNING
WARNING
Remove rings, bracelets, wristwatches, and
neck chains before working on any vehicle.
Jewelry can catch on equipment and cause
injury, or may short across an electrical circuit
and cause severe burns or electrical shock.
