TM 9--2350--292--20--1
0113 00--4
TROUBLELIGHT FAILS TO OPERATE -- CONTINUED
0113 00
Is continuity present?
Place one multimeter lead on black wire terminal at
trouble light switch and the other in IN side of lamp
holder socket labeled DRIVE. Check for continuity.
no
yes
F
G Place one multimeter lead in GROUND side of
lamp holder socket and the other lead in pin A
in trouble light harness connector. Check for
continuity.
Is continuity present?
Replace black wire
between switch and
lamp socket holder
(WP 0280 00). Verify
fault is corrected.
no
yes
Replace trouble light
(WP 0280 00). Verify
fault is corrected.
CONTINUED FROM STEP E
Replace lamp holder
socket (WP 0280 00).
Verify fault is corrected.
END OF TASK
