TM 9--2350--292--20--1
0144 00--2
PTO CLUTCH DOES NOT ENGAGE, INDICATOR IS NOT LIT AND
GOVERNOR DOES NOT OPERATE PROPERLY -- CONTINUED
0144 00
CONTINUED FROM STEP B
Is continuity present?
no
yes
1. Disconnect lead 10 from terminal 2 of CB4.
2. Place one multimeter lead in each CB4
connector. Check for continuity.
Replace CB4
(WP 0244 00). Verify
fault is corrected.
C
D
Is continuity present?
no
yes
1. Disconnect lead 10 from TB1 terminal 14.
2. Place one multimeter lead on lead 10 to CB4
and other lead on lead 10 to TB1 terminal 14.
Check for continuity.
Repair (WP 0290 00) or re-
place (WP 0244 00) lead
10. Verify fault is corrected.
CONTINUED ON NEXT PAGE
