TM 9--2350--292--20--1
0144 00--6
PTO CLUTCH DOES NOT ENGAGE, INDICATOR IS NOT LIT AND
GOVERNOR DOES NOT OPERATE PROPERLY -- CONTINUED
0144 00
CONTINUED ON NEXT PAGE
K
Does either of the solenoids operate?
no
yes
1. Turn PTO CLUTCH switch and MASTER
switch ON (TM 9--2350--292--10) and listen to
both rotary actuator solenoids at the hydraulic
oil cooler.
2. Turn PTO CLUTCH switch and MASTER
switch OFF (TM 9--2350--292--10).
Go to Step O.
CONTINUED FROM STEP G
L
Does governor solenoid operate?
no
yes
1. Turn MASTER switch and PTO CLUTCH
switch ON (TM 9--2350--292--10) and listen for
governor solenoid to operate.
2. Turn MASTER switch and PTO CLUTCH
switch OFF (TM 9--2350--292--10).
Go to Step Q.
M
Is 24 V dc present?
no
yes
1. Turn MASTER switch and PTO CLUTCH
switch ON (TM 9--2350--292--10).
2. Place multimeter red lead in harness 2W601
PTO CLUTCH connector socket A and black
lead to ground. Check for voltage.
3. Turn MASTER switch and PTO CLUTCH
switch OFF (TM 9--2350--292--10).
Repair (WP 0290 00) or
replace (WP 0291 00)
harness 2W601. Verify
fault is corrected.
