TM 9--2350--292--20--1
PTO CLUTCH DOES NOT ENGAGE, INDICATOR IS NOT LIT AND
GOVERNOR DOES NOT OPERATE PROPERLY -- CONTINUED
0144 00
S
Is 24 V dc present?
CONTINUED FROM STEP R
1. Reconnect harness 3W143 P1 to engine
disconnect bracket.
2. Disconnect lead 627 from engine governor
solenoid.
3. Turn MASTER switch ON
(TM 9--2350--292--10).
4. Place multimeter red lead in lead 627
connector socket and black lead to ground.
Check for voltage.
5. Turn MASTER switch OFF
(TM 9--2350--292--10).
yes
no
Repair (WP 0290 00) or
replace (WP 0300 00)
harness 3W202. Verify
fault is corrected.
Notify Direct Support
Maintenance.
END OF TASK
0144 00--9/10 blank