TM 9--2350--292--20--1
0145 00--1
HIGH TEMP INDICATOR FAILS TO LIGHT WHEN PTO CLUTCH OIL
TEMPERATURE IS HIGH. ALL OTHER SYSTEMS OPERATE PROPERLY.
0145 00
THIS WORK PACKAGE COVERS:
High Temp Indicator Fails To Light When PTO Clutch Oil Temperature Is High. All Other Systems Operate
Properly.
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Multimeter (item 84, WP 0717 00)
Equipment Conditions
Vehicle MASTER switch OFF (TM 9--2350--292--10)
LED repalced (WP 0244 00)
Subfloor plates 26 And 27 removed (WP 0454 00)
Personnel Required
Two
Did indicator light?
1. Disconnect lead 525 from PTO oil high
temperature switch.
2. Place a jumper wire in lead 525 connector
socket and attach other end of jumper to
ground.
3. Turn MASTER switch ON (TM
9--2350--292--10) and watch PTO HIGH TEMP
indicator.
4. Turn MASTER switch OFF
(TM 9--2350--292--10).
no
yes
A
CONTINUED ON NEXT PAGE
WARNING
Remove rings, bracelets, wristwatches,
and neck chains before working on any
vehicle. Jewelry can catch on equip-
ment and cause injury, or may short
across an electrical circuit and cause
severe burns or electrical shock.
Replace PTO high
temperature switch
(WP 0545 00). Verify
fault is corrected.
FORWARD
