TM 9--2350--292--20--1
0144 00--8
PTO CLUTCH DOES NOT ENGAGE, INDICATOR IS NOT LIT AND
GOVERNOR DOES NOT OPERATE PROPERLY -- CONTINUED
0144 00
no
yes
Repair (WP 0290 00) or replace
(WP 0316 00) harness 4W103.
Verify fault is corrected.
no
yes
Repair (WP 0290 00) or replace
(WP 0300 00) harness 3W202
Verify fault is corrected.
Replace rotary actuator
solenoids (WP 0230 00).
Verify fault is corrected.
CONTINUED FROM STEP P
CONTINUED FROM STEP L
Q
Is 24 V dc present?
1. Open air intake grilles above battery
compartment (TM 9--2350--292--10).
2. Disconnect harness 4W103 P3 from bulkhead
disconnect bracket.
3. Turn MASTER switch ON
(TM 9--2350--292--10).
4. Place multimeter red lead on harness 4W103
P3 receptacle socket L and black lead to
ground. Check for voltage.
5. Turn MASTER switch OFF
(TM 9--2350--292--10).
CONTINUED ON NEXT PAGE
R
Is 24 V dc present?
no
yes
1. Reconnect harness 4W103 P3 to bulkhead
disconnect bracket.
2. Remove engine deck (WP 0417 00).
3. Disconnect harness 3W143 P1 from engine
disconnect bracket.
4. Turn MASTER switch ON
(TM 9--2350--292--10).
5. Place multimeter red lead on harness 3W143
P1 socket N and black lead to ground. Check
for voltage.
6. Turn MASTER switch OFF
(TM 9--2350--292--10).
Repair (WP 0290 00) or replace
(WP 0295 00) harness 3W143.
Verify fault is corrected.