TM 9--2350--292--20--2
0389 00--4
TORSION BARS AND TORSION BAR ANCHORS REPLACEMENT --
CONTINUED
0389 00
Installation
1. Install plug (13) in torsion bar housing (11).
2. Install torsion bar anchor (12) in torsion bar housing (11) with the word FRONT facing toward the front of the ve-
hicle.
3. Install access cover (9) and new gasket (10) with four screws (7) and four new lockwashers (8). Dowel pins on
access cover (9) must engage the spanner holes in torsion bar anchor (12).
4. Torque four screws (7) to 40--50 lb--ft (54--68 NSm).
Figure 178
12
11
13
9
10
8
7