PIVOT ARM ASSEMBLY REPAIR

Installation (cont) - TM-9-2350-292-20-2_228

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
201

TM 9-2350-292-20-2 0390 00-1 PIVOT ARM ASSEMBLY REPAIR 0390 00 THIS WORK PACKAGE COVERS: Removal, Disassembly, Assembly, Installation INITIAL SETUP: Tools and Special Tools General mechanic’s tool kit (item 1, WP 0717 00) Hydraulic jack (item 10, WP 0717 00) Torque wrench (item 9, WP 0717 00) Materials/Parts Lockwashers (11) (item 130, WP 0718 00) Sealing compound (item 42, WP 0716 00) Dry - cleaning solvent (item 1, WP 0716 00) Pressure sensitive tape (item 41, WP 0716 00) Safety goggles (item 93, WP 0716 00) Equipment Conditions Track disconnected (TM 9- 2350- 292- 10) For positions 1 and 6 only Suspension arm assembly removed (WP 0388 00) Personnel Required Two References TM 9- 2350- 292- 10 NOTE This task applies to either the left or right pivot arm as- semblies stations 1 through 6. Removal 1. Position hydraulic jack to support pivot arm assembly (1). 2. Remove 11 screws (2) and 11 lockwashers (3) securing arm assembly (1) to vehicle hull. Discard lockwashers. 3. Lower hydraulic jack and remove pivot arm assembly (1) from vehicle hull. Figure 178 1 2 3

Privacy Statement
Press Release
Contact