Removal - TM-9-2350-292-20-2

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
205

TM 9--2350--292--20--2 0391 00--2 TRACK SUPPORT ROLLER REPAIR -- CONTINUED 0391 00 Removal--Continued NOTE A static grounding spring is located under every hubcap of every support roller except the left front roller. 2. Remove static grounding spring (5). 3. Remove cup assembly (6) and gasket (7). Discard gasket. 4. Remove cotter pin (8) and separate flexible end fitting (9) from cup assembly (6). Discard cotter pin. 5. Start vehicle (TM 9--2350--292--10). Position track so that track links, from which track shoe guides were re- moved, are directly on support roller assembly (10) to be removed. 6. Place hardwood lumber on top of solid rubber wheel and position hydraulic jack on hardwood lumber. Raise track clear of support roller assembly (10) using hydraulic jack. 7. Remove seal (11). Discard seal. Figure 182 10 5 11 7 6 8 9

Privacy Statement
Press Release
Contact