TM 9--2350--292--20--2
0391 00--6
TRACK SUPPORT ROLLER REPAIR -- CONTINUED
0391 00
Installation--Continued
CAUTION
Damage to bearing may occur if nut is over torque.
Care should be taken as this may affect the adjust-
ment by forcing the nut forward, thereby tightening the
bearing adjustment.
11. Install new flat washer (12) and nut (13). Torque nut (13) to 150--300 lb--ft (203--407 NSm). Using a dial indicator,
check that end play does not exceed 0.0005--0.005 in. (0.0127--0.127 mm). Bend edges of flat washer (12) along
flats of nut (13).
12. Install three track shoe guides directly above track support roller assembly (10) (TM 9--2350--292--10).
13. Install flexible end fitting (9) in cup assembly (6) with new cotter pin (8).
14. Install new gasket (7) and cup assembly (6) onto bracket (20).
15. Install static spring (5).
16. Install new seal (11).
Figure 182
20
10
12
13
5
11
7
6
8
9