ADJUSTING LINK AND COMPONENTS REPAIR (OLD CONFIGURATION)

Installation (cont) - TM-9-2350-292-20-2_238

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
211

TM 9--2350--292--20--2 0392 00--1 ADJUSTING LINK AND COMPONENTS REPAIR (OLD CONFIGURATION) 0392 00 THIS WORK PACKAGE COVERS: Removal, Disassembly, Assembly, Installation INITIAL SETUP: Tools and Special Tools General mechanic’s tool kit (item 1, WP 0717 00) Slide puller (item 46, WP 0717 00) Mechanical puller (item 49, WP 0717 00) Torque wrench (item 2, WP 0717 00) Materials/Parts Cotter pins (2) (item 107, WP 0718 00) Lockwashers (2) (item 9, WP 0718 00) Preformed packing (item 106, WP 0718 00) Antiseize compound (item 90, WP 0716 00) Equipment Conditions Lower armor skirt panel # 1 support removed (WP 0442 00) Idler hub assembly removed (WP 0394 00) Personnel Required Two NOTE This task pertains to the left and right adjusting link. Left and right adjusting links look identical, however the right adjusting link is longer. Removal WARNING 1. Remove cotter pin (1) from clevis pin (2). Discard cotter pin. 2. Remove nut (3), flat washer (4) and clevis pin (2) from adjusting link (5) and arm and hub assembly (6). 3. Remove cotter pin (7) from clevis pin (8). Discard cotter pin. 4. Remove nut (9), flat washer (10), clevis pin (8) and adjusting link (5) from vehicle. Figure 183 1 2 3 4 5 6 7 8 9 10 ARMOR SKIRTS REMOVED FOR CLARITY

Privacy Statement
Press Release
Contact