TM 9--2350--292--20--2
0392 00--3
ADJUSTING LINK AND COMPONENTS REPAIR (OLD CONFIGURATION) --
CONTINUED
0392 00
Assembly
1. Install bearing (20) in adjusting link (5).
2. Stake bearing (20) in three equally spaced places on both sides of adjusting link (5).
3. Install screw (19) in adjusting link (5). Do not tighten screw (19).
4. Install relief valve (18) to adjusting link (5).
5. Install valve assembly (16) and new preformed packing with retainer (17) on adjusting link (5). Torque valve as-
sembly (16) to 40--60 lb--ft (54--81 Nm).
6. Install plug (15) in adjusting link (5).
7. Install lubrication fitting (14) in adjusting link (5).
8. Install bracket (13) to adjusting link (5) with two screws (11) and two new lockwashers (12).
Figure 184
15
20
5
18
11
12
13
14
16
17
19