Disassembly - TM-9-2350-292-20-2

ADJUSTING LINK AND COMPONENTS REPAIR (OLD CONFIGURATION)

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
212

TM 9--2350--292--20--2 0392 00--2 ADJUSTING LINK AND COMPONENTS REPAIR (OLD CONFIGURATION) -- CONTINUED 0392 00 Disassembly 1. Remove two screws (11), two lockwashers (12) and bracket (13) from adjusting link (5). Discard lockwashers. 2. Remove lubrication fitting (14) from adjusting link (5). 3. Remove plug (15) from adjusting link (5). 4. Remove valve assembly (16) and preformed packing with retainer (17) from adjusting link (5). Discard preformed packing. 5. Remove relief valve (18) from adjusting link (5). 6. Remove screw (19) from adjusting link (5). CAUTION All signs of previous stake positions on adjusting link must be completely removed. Failure to comply could result in improper bearing fit causing damage to bearing and adjusting link. 7. Remove staked portion of adjusting link (5) that retains bearing (20). 8. Remove bearing (20) from adjusting link (5). 9. Inspect parts for damage and replace as required. Figure 184 15 20 5 18 11 12 13 14 16 17 19

Privacy Statement
Press Release
Contact