TM 9--2350--292--20--2
TRACK SUPPORT ROLLER REPAIR -- CONTINUED
0391 00
Installation--Continued
17. Install new gasket (4) and hubcap (3) with six screws (1) and six new lockwashers (2).
18. Lubricate track support roller assembly (10) (WP 0187 00).
19. Adjust track tension (TM 9--2350--292--10).
20. Perform five mile road test. Remove hubcap (3) and check that end play is between 0.001--0.010 in.
(0.0254--0.254 mm). If readjustment is required, set end play to 0.001--0.005 in. (0.0254--0.127 mm). Install
hubcap (3).
21. Lubricate track support roller assembly (10) (WP 0187 00).
Figure 182
10
4
3
2
1
END OF TASK
0391 00--7/8 blank
