Removal (cont) - TM-9-2350-292-20-2

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
446

TM 9--2350--292--20--2 0452 00--4 DRAIN VALVES, CONTROLS AND RELATED PARTS REPLACEMENT-- CONTINUED 0452 00 Removal--Continued NOTE Front control assembly has one nonmetallic grommet. Rear control assembly has two nonmetallic grommets. 14. Remove control assembly (29) with nonmetallic grommet(s) (37) from bulkhead. Separate and discard nonmetallic grommet(s). NOTE When removing cable spacer assembly both front and rear control assemblies must be disconnected. 15. Remove two screws (38), two flat washers (39), two lockwashers (40), two nuts (41) and cable spacer assembly (32) from driver’s seat support. Discard lockwashers. 16. Remove six screws (42), six lockwashers (43) and drain valve assembly (27) from vehicle hull. Discard lockwash- ers. 17. Remove preformed packing (44) from drain valve assembly (27). Discard preformed packing. 18. Inspect parts for damage and replace as required. Figure 230 27 29 32 43 42 37 37 38 39 40 41 44 37 29 29 FRONT DRAIN VALVE FRONT BULKHEAD REAR BULKHEAD

Privacy Statement
Press Release
Contact