Installation - TM-9-2350-292-20-2

Installation (cont) - TM-9-2350-292-20-2_481

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
448

TM 9--2350--292--20--2 0452 00--6 DRAIN VALVES, CONTROLS AND RELATED PARTS REPLACEMENT-- CONTINUED 0452 00 Installation--Continued NOTE Front control assembly is secured to vehicle hull with one clamp. Rear control assembly is secured to vehicle hull with five clamps. 8. Secure control assembly (29) to vehicle hull with screws (33), new lockwashers (34), flat washers (35) and clamps (36). 9. Install control assembly (29) through cable spacer assembly (32) and secure with nut (31). 10. Install clevis nut (30) and two clevises (3 and 20) on each end of control assembly (29). 11. Secure control assembly (29) to bracket assembly (24) with two cable nuts (28). 12. Install bracket assembly (24) on drain valve assembly (27) with three screws (25) and three new lockwashers (26). Figure 230 20 25 24 27 28 30 26 29 3 31 30 32 29 33 34 35 36 36 33 34 FRONT DRAIN VALVE FRONT BULKHEAD REAR BULKHEAD

Privacy Statement
Press Release
Contact