TM 9--2350--292--20--20357 00--8BRAKE LINKAGE ALIGNMENT, ADJUSTMENT AND BLEEDING(NEW CONFIGURATION WITH BRAKE MODULATION) -- CONTINUED0357 00BleedingWARNING1. Turn vehicle MASTER switch to ON position.2. Depress and release hydraulic brake pedal with full slow strokes.3. Open the PULL valve (1) and listen for trapped air traveling in the line to the reservoir.4. Close PULL valve (1) when the gurgle sound stops, indicating the air has been purged from the line.5. Observe brake pressure gauge (2). Pressure should build up to 1300 psi (8963 kPa) and brake pump motorshould shut off.6. Repeat steps 2 and 3 if pressure does not reach 1300 psi (8963 kPa) and the brake pump motor does not shutoff.12NOTEFOLLOW--ON MAINTENANCE:Close subfloor access plate #16, if opened(WP 0454 00).Install hull engine compartment access covers, ifremoved (WP 0434 00).Install subfloor access plate #6, if removed(WP 0454 00).Install powerpack, if removed (WP 0188 00).Perform WP 0359 00 Neutral Safety Switch, SteeringControl Lock and Brake Lock Adjustment, if necessary.END OF TASK
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
