CHAPTER 9: MAINTENANCE OF HULL- AND CAB-RELATED COMPONENTS
TM 9-2350-256-20
9-80 REPLACE/REPAIR/SERVICE SERVICE BRAKE CONTROLS AND LINKAGES-Continued
34
Remove lever (113) by removing lubrication fitting (124) and retaining ring (125).
35
Remove two bearing units (126 and 127) with short left shaft (128) assembled by removing four screws (129) and
four lockwashers (130).
36
Remove short left shaft (128) from two bearing units (126 and 127) by removing retaining ring (131) and lever (108).
37
Remove levers (109 and 115) by removing retaining ring (132) from each end of long right shaft (133).
38
Remove two bearing units (134 and 135) and long right shaft (133) by removing four screws (136) and four
lockwashers (137). Remove long right shaft from two bearing units.
b. DISASSEMBLY
Remove setscrew (41) and lubrication fitting (138) from
each bearing unit (42).
c. ASSEMBLY
Install setscrew (41) and lubrication fitting (138) to each
bearing unit (42).
9-190