SECTION V: CONTROLS AND LINKAGES
TM 9-2350-256-20
15
Remove rod assembly (49) from rod assembly (50) by removing screw (51), lockwasher (52), and nut (53).
16
Remove clevis (54) and nut (55).
17
Disconnect rod assembly (50) from lever (56) by
removing screw (57) and lockwasher (58).
18
Remove rod end (59) and nut (60) from rod
assembly
(50).
19
Pry rubber boot (61) from bulkhead (62) and
remove
rod assembly (50) from bulkhead.
20
Remove rod end (63) and nut (64) from rod
assembly
(50).
21
Remove clamp (65), rubber bushing (66), and
rubber boot (61) from rod assembly (50).
9-187
