SECTION V: CONROLS AND LINKAGES
TM 9-2350-256-20
30
Remove plate assembly (91) from yokes (103 and 104) by removing two cotter pins (105), two grooved pins (106),
and two lubrication fittings (107).
31
Remove yokes (103 and 104) from levers (108 and 109) by removing cotter pin (110) and straight pin (111) from
each.
32
Disconnect rod assembly (112) from lever (113) and rod assembly (114) from lever (115) by removing cotter pin
(116) and straight pin (117) from each.
33
Remove rod assemblies (112 and 114) from brake-apply-and-slack adjuster levers (118) by removing cotter pin
(119), grooved pin (120), and lubrication fitting (121) from each. Remove clevis (122) and nut (123) from each end
of rod assemblies.
9-189
