CHAPTER 9: MAINTENANCE OF HULL- AND CAB-RELATED COMPONENTS
TM 9-2350-256-20
9-80 REPLACE/REPAIR/SERVICE SERVICE BRAKE CONTROLS AND LINKAGES--Continued
28
Install clevis (54) and nut (55) to rod assembly (49).
29
Connect rod assembly (49) to rod assembly (50) with screw (51), new lockwasher (52), and nut (53).
30
Install rod assembly (32) to rod assembly (49) with two nuts (47) and turnbuckle (48).
31
Install six rollers (46) and six bolts (45).
32
Install two bearing units (42) with four screws (43) and four new lockwashers (44).
33
Install shaft (39) to two bearing units (42) and tighten two setscrews (41).
34
Install levers (18 and 29) to shaft (39) with two retaining rings (40).
35
Install clevis (37), nut (38), rod end (35), and nut (36) to rod assembly (28).
36
Connect rod assembly (28) to rod assembly (32) with straight pin (34) and new cotter pin (33). Install rod assembly
(28) to lever (29) with screw (30) and new lockwasher (31).
9-194
