SECTION V: CONTROLS AND LINKAGES
TM 9-2350-256-20
4
Disconnect rod assembly (13) from brake cam assembly (8) by removing cotter pin (14) and straight pin (15).
5
Remove rod assembly (13) by removing screw (16) and lockwasher (17) from lever (18).
6
Remove two blocks (19) from rod assembly (13) by removing two screws (20) and two lockwashers (21).
Remove
rod end (22) and nut (23) from rod assembly.
7
Remove brake cam assembly (8) from bracket
assembly (24) by removing spring pin (25), shaft (26),
and
lubrication fitting (27).
9-185
