TM 9--2350--292--20--2
0667 00--17
DEEP WATER FORDING KIT -- CONTINUED
0667 00
Installation--Continued
BILGE PUMP (CONTINUED)
6. Remove two screws (15), two lockwashers (16) and cover (17) from top exterior of hull. Stow cover, retain screws
and discard lockwashers.
7. Install gasket (18) on adapter (19). Install adapter (19) with gasket (18) in top exterior of hull; secure with two
screws (15) and two new lockwashers (16).
8. Install other end of hose (13) to adapter (19) and tighten hose clamp (14).
9. Connect adapter (20) to adapter (19). Install one hose clamp (21) on each end of hose (22). Connect one end of
hose (22) to adapter (20) and other end to tube assembly (23). Tighten two hose clamps (21).
10. Install two clips (24) on tube assembly (23). Position tube assembly (23) and secure to rear of main engine air
inlet (25) with two screws (26) and two new lockwashers (27).
13
14
17
16
15
19
16
15
20
21
23
27
26
24
21
22
18
25
