BILGE PUMP - TM-9-2350-292-20-2

VENTILATION BLOWER SEAL AND BOOM FOOT DRAIN SHUTOFF CLAMPS - TM-9-2350-292-20-2_1161

BILGE PUMP (cont) - TM-9-2350-292-20-2_1163

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
1125

TM 9--2350--292--20--2 0667 00--15 DEEP WATER FORDING KIT -- CONTINUED 0667 00 Installation--Continued BILGE PUMP NOTE Removal and opening of subfloor plates (as required) and stowage baskets removal will be necessary for the instal- lation of the bilge pump hoses. Route hoses and tubes from bilge pump assembly toward opening in subfloor (4). 1. Remove subfloor plates #18 and #27 (WP 0454 00). 2. Remove and stow three screws (1), three flat washers (2) and access cover (3) from subfloor plate (4). 3. Remove and retain two screws (5), two flat washers (6) and plate (7) from subfloor plate (4). 1 2 3 4 5 6 5 6 7

Privacy Statement
Press Release
Contact