TM 9--2350--292--20--2
0667 00--16
DEEP WATER FORDING KIT -- CONTINUED
0667 00
Installation--Continued
BILGE PUMP (CONTINUED)
NOTE
All of the following items are kit--furnished unless other-
wise noted.
4. Install two hose clamps (8) on each end of hose (9). Connect one end of hose (9) to tube (10) and other end to
bent tube (11). Tighten two hose clamps (8).
5. Install grommet (12) in opening of subfloor plate (4). Route hose (13) through grommet (12). Install one hose
clamp (14) on each end of hose (13). Connect one end of hose (13) to bent tube (11), tighten hose clamp (14).
4
14
13
12
14
11
8
9
8
10