TM 9--2350--292--20--2
0667 00--13
DEEP WATER FORDING KIT -- CONTINUED
0667 00
Installation--Continued
FUEL TANK AND ACETYLENE BOTTLE VENT HOSES (CONTINUED)
5. Remove four screws (10), four lockwashers (11) and armor plate (12) from left rear hull. Discard lockwashers.
NOTE
The fourth screw and lockwasher will be installed with clip.
6. Install gasket (13) and cover (14) over acetylene bottle vent, secure with three of four screws (15) and three of
four new lockwashers (16).
7. Install clip (17) over fuel tank vent hose (9). Position clip (17), secure to cover (14) with fourth screw (15) and new
lockwasher (16).
8. Install bushing (18) in threaded hole of cover (14), install elbow (19) in bushing (18).
9. Install hose clamp (20) over vent hose (21), connect vent hose (21) to elbow (19). Tighten hose clamp (20).
10. Install five clamps (22) over vent hose (21). Position five clamps (22) on left main engine air inlet pipe (7); secure
with five screws (23) and five new lockwashers (24).
11. Reinstall armor plate (12) with four screws (10) and four new lockwashers (11).
Figure 354
Figure 354
10
11
12
13
14
15
16
9
18
19
20
21
22
23
24
7
15
16
17
