MAIN ENGINE EXHAUST OUTLET PIPES - TM-9-2350-292-20-2

FIRE EXTINGUISHER NOZZLES - TM-9-2350-292-20-2_1155

MAIN ENGINE EXHAUST OUTLET PIPES (cont) - TM-9-2350-292-20-2_1157

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
1119

TM 9--2350--292--20--2 0667 00--9 DEEP WATER FORDING KIT -- CONTINUED 0667 00 Installation--Continued MAIN ENGINE EXHAUST OUTLET PIPES 1. Remove eight screws (1), eight lockwashers (2) and two exhaust plates (3) from top rear of engine deck (4). Stow exhaust plates, retain screws and discard lockwashers. 2. Remove and retain two clamps (5) and two exhaust elbows (6) from two engine exhaust outlets (7). 3. Install one preformed packing (8) on each of two flexible exhaust pipes (9). 4. Install two flexible exhaust pipes (9) on two engine exhaust outlets (7). Apply adhesive sealant (12477551) to joint between pipe flanges and secure with two clamps (10). Figure 3 1 2 3 5 6 7 8 9 10 4 4

Privacy Statement
Press Release
Contact