AUXILIARY POWER UNIT (APU)

AUXILIARY POWER UNIT (APU) - TM-9-2350-292-20-2_1151

AUXILIARY POWER UNIT (APU) (cont) - TM-9-2350-292-20-2_1153

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
1115

TM 9--2350--292--20--2 0667 00--5 DEEP WATER FORDING KIT -- CONTINUED 0667 00 Installation--Continued AUXILIARY POWER UNIT (APU) (CONTINUED) 8. Open APU access door (TM 9--2350--292--10). 9. Disconnect fan electrical wiring from APU wiring harness 3W730 connector P1 (WP 0439 00). 10. Tape APU wiring harness 3W730 connector P1 with waterproof tape (12477548--7). Apply adhesive sealant (MIL--A--46106 11EBN) to waterproof tape (12477548--7). 11. Remove eight screws (5), eight lockwashers (6), eight flat washers (7), four clips (8) and fan (9) from APU door (10). Discard lockwashers (6). Place fan in waterproof bag and stow as appropriate. Stow eight screws (5), eight flat washers (7) and four clips (8). Figure 355 5 6 7 8 9 5 6 7 10

Privacy Statement
Press Release
Contact